Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Lubbock?
Spring repair in Lubbock typically runs $180 – $340 for a single torsion or extension spring, and that covers the spring, the labor and the safety check. Most doors carry two springs that wear at the same rate, so a matched pair usually gets replaced together and lands at roughly twice that range. The written estimate you get before we touch anything sets the final price, and the estimate itself is free.
That number surprises some homeowners and relieves others. Either way, it’s worth understanding what sits behind it, because a spring quote in Lubbock isn’t the same as a spring quote in a colder part of the country. Let’s break it down.
Key Takeaways
- A single spring replacement in Lubbock typically estimates at $180 – $340.
- Torsion springs are replaced in matched pairs, so plan on roughly double for a full swap.
- Our technicians have up to 13 years of experience with the major brands, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor.
- Estimates are free, and the written estimate is what you pay.
- We answer 24/7, and fast dispatch runs 7am-7pm, Sunday through Friday.
Spring Replacement Cost Breakdown (2026)
Here’s how the price lines up when we write an estimate for a Lubbock home. These are typical estimated ranges for the local market as of 2026, not a menu of exact prices.
| Line item | Typical estimated range |
|---|---|
| Single torsion spring replacement | $180 – $340 |
| Matched pair (both springs at once) | About twice the single-spring range |
| Cable repair or replacement (often paired with springs) | $130 – $250 |
| Roller replacement | $110 – $220 |
| Track realignment | $120 – $240 |
| Panel replacement (if a failed spring let the door drop) | $250 – $500 |
| Opener repair (if the opener took a hit) | $120 – $320 |
Most spring jobs stay in the single-spring or matched-pair line. The other items come up when we find something downstream of the spring that’s worn too. A snapped spring doesn’t just stop the door; it can bend a track, chew up rollers or leave the opener straining against dead weight. If a homeowner has been running the opener on a broken spring for a week, the estimate sometimes climbs into the garage door repair range of $150 – $600 once we account for everything that wore out in the meantime.
What pushes the price up: heavier doors (a double-car insulated door takes a stronger spring than a basic single), a matched pair versus a single, and any cable or roller damage we find while we’re in there. What pulls it down: replacing a single spring early before it takes anything else with it. That’s the honest reason we’d rather look at a door the week a spring starts acting up than months later.
What Affects Spring Replacement Pricing in Lubbock
A few things move the number around, and some of them are specific to how homes here are built and used.
- Door weight and size. A wide, insulated double door in a Lubbock neighborhood like Monterey or Tech Terrace carries more steel and glass than a plain single door, so it needs a heavier-gauge spring. Heavier spring, higher line item.
- Single versus matched pair. Springs are usually replaced as a pair because they’ve cycled the same number of times. Replacing one and leaving the other is a false economy: the older spring tends to fail soon after, and you pay the labor twice.
- Spring type. Torsion springs (the coiled bar above the door) and extension springs (the stretched springs along the tracks) price differently, and some older Lubbock garages still run extension springs. We’ll tell you which system you have and what each option costs.
- What the failure took with it. A clean snap is cheaper than a snap that bent a track or stripped a cable. The inspection before the quote catches this so there are no surprises mid-job.
- Brand and opener integration. If your door runs on a LiftMaster, Chamberlain, Genie, Craftsman or Raynor opener, we check that the opener’s force settings and safety sensors are matched to the new spring tension. That’s part of the job, not an add-on.
- Access and door condition. A door that’s been out of balance for a while can put extra strain on the hinges and rollers, and those are cheap parts that are worth inspecting while the door’s already apart.
One local note worth knowing: Lubbock’s dry air and wide temperature swings through the year put steady wear on springs and cables, and doors that get used several times a day (school runs, work trucks, deliveries) cycle faster than a door that opens once in the morning. A spring rated for a certain number of cycles will hit that number sooner on a busy household. That’s the main reason two neighbors on the same block can have very different spring timelines. Nothing we can change about the weather, but it’s why we check cycle count and balance on every visit.
If you want to understand the full picture of what we cover beyond springs, our Dunmore Garage Door Repair page lays out the three service lines: repair, opener repair and installation. We handle the mechanical door and the opener as one system, which means you’re not stuck between two contractors pointing at each other when a problem crosses over.
How to Save on Spring Replacement
There’s no magic discount on springs, but a few habits keep the bill at the low end of the range.
- Replace the pair, not one. It sounds backwards, but paying for two now beats paying for labor twice in six months. The matched pair lives out its cycle count together.
- Address the first sign of trouble. A door that’s suddenly heavy, slow to rise or making a sharp bang is telling you a spring is on its way out. Catching it early means you’re paying for a spring, not a spring plus a bent track and a strained opener.
- Get the estimate in writing before work starts. The written estimate is the price. That’s how we work, and it protects you from a number that creeps up mid-job.
- Ask about balance and lubrication while we’re there. A well-balanced, lightly lubricated door cycles easier and gets more life from its springs. It’s a small thing that adds up.
- Don’t ignore the opener. An opener that’s been fighting a weak spring runs hot and wears out. Fixing the spring often saves the opener too.
Estimates are free, and there’s no pressure to book on the spot. Call (866) 361-7024 and we’ll talk through what’s happening with your door and what a spring replacement would estimate at for your specific setup.
Can You Replace a Spring the Same Day?
Often, yes. Spring replacement is a job we can usually complete in one visit once we’ve confirmed the spring type and door weight. We answer 24/7, and fast dispatch runs 7am-7pm, Sunday through Friday. If you call outside dispatch hours, we’ll book you into the next opening.
Same-day work is the same price as any other day. There’s no surcharge for a job that happens sooner, and we don’t inflate the estimate because a door is stuck. The written estimate is the price, full stop.
If your door is stuck open or stuck shut and you need it functioning for work or family, call and tell us what’s happening. We’ll give you a realistic picture of when we can get out to your Lubbock home and what the job will likely involve.
Should You Repair the Spring or Replace the Door?
Repair the spring in almost every case. A spring is a wear part, and a door that’s otherwise sound (panels straight, tracks true, opener working) is worth keeping. Full new door installation estimates at $700 – $2200, which is a much bigger commitment than a spring job in the $180 – $340 range.
Replacement makes sense when the door itself is failing: cracked or rotted panels, a frame that’s out of square, or a door that’s been repaired so many times the cost of patching it is close to the cost of a new one. We’ll tell you honestly which side of that line your door is on. If it’s a candidate for panel replacement instead, that estimates at $250 – $500 and is a middle path worth considering. Repair first, replace only when it makes sense.
We work on the brand you already own rather than steering you toward a specific manufacturer. Whether your door is a Clopay, Amarr or Wayne Dalton, and whether your opener is a LiftMaster, Chamberlain, Genie, Craftsman or Raynor, we know the system and we’ll quote the job against what you have.
FAQs – Spring Replacement Cost
How much does spring replacement cost in Lubbock?
Spring replacement in Lubbock typically estimates at $180 – $340 for a single spring, and roughly twice that for a matched pair. The exact figure depends on door weight, spring type and whether the failure damaged anything else. Call (866) 361-7024 for a free estimate and we’ll give you a specific number.
Is it cheaper to replace one spring or both?
Both, over time. A single spring estimates at $180 – $340, but replacing one and leaving a worn partner usually means paying labor twice within a short window. The pair lives out its cycle count together, so the matched replacement is the better value. We’ll quote both options so you can see the difference.
Do I need a permit for garage door spring replacement in Lubbock?
Spring replacement is generally a repair rather than a structural change, so most homeowners don’t need a permit for it. If your project involves anything beyond that, ask the city’s building department to confirm. We can talk through the scope of your job when we quote it.
Can you come today for a broken spring?
Possibly. We answer 24/7 and fast dispatch runs 7am-7pm, Sunday through Friday. If you call outside dispatch hours, we’ll book you into the next opening. Spring replacement is usually a one-visit job once we’ve confirmed the spring type and door weight. Call (866) 361-7024 and we’ll find you a slot.
Does same-day spring replacement cost more?
No. Same-day work prices the same as any other day. There’s no premium, surcharge or overtime rate, and the written estimate sets the final price. If you’re stuck with a door that won’t open, call (866) 361-7024 and we’ll give you an honest number.
A Safety Note Before You Touch Anything
Torsion springs store an enormous amount of energy, and a spring under tension can cause serious injury if it releases unexpectedly. Extension springs are dangerous in a different way: when they fail, they can fly. This is not a job for a screwdriver and a YouTube video. We’d rather you call a trained technician than risk your hands, and we say that as people who work with these systems every day. Our technicians have up to 13 years of experience and know exactly how to release and replace a spring safely. If a spring is broken or the door is hanging unevenly, keep people and pets clear of the door and call us.
What Happens When You Call
You call (866) 361-7024, tell us what the door is doing, and we ask a few questions: door size, spring type if you know it, opener brand, and whether anything else has been acting up. From there we can often give you a ballpark over the phone and confirm the real number on site. The estimate is free, written, and there’s no obligation. We answer 24/7, and fast dispatch runs 7am-7pm, Sunday through Friday. If your spring has let go and you’re stuck, that’s exactly the call we want to get.
Pricing reflects the Lubbock market as of 2026. Dunmore Garage Door Repair offers free estimates – call (866) 361-7024.
Written by the team at Dunmore Garage Door Repair.
What Our Customers Say
"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Amanda Ziegler"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Carlos Martinez"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Alma Delgado