Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in Lubbock?
Panel replacement in Lubbock typically costs $250 – $500 per job, with most single-section replacements landing in the $280 – $380 range. The final price depends on how many panels you’re replacing, whether the section is a standard solid panel or one with windows, and whether the new panel matches your existing door’s profile and color. We give you a written estimate before any work starts, so the number you see is the number the job is priced at.
If your door has dents, rust, cracked sections, or a panel that’s pulled away from the stile, replacing the damaged section usually costs far less than a whole new door. A full new door installation in Lubbock runs $700 – $2,200, so panel replacement is often the smarter call when the rest of the door is sound.
Key Takeaways
- Typical panel replacement in Lubbock: $250 – $500 per job.
- Single standard panel replacement is usually the low end of that range; multiple panels or windowed sections push it up.
- A full new door installation runs $700 – $2,200, so replacing one bad panel almost always costs less.
- We service panel doors from Clopay, Amarr, Wayne Dalton, and Raynor, plus openers from LiftMaster, Chamberlain, Genie, and Craftsman.
- Free estimates, and we answer 24/7 at (866) 361-7024.
Panel Replacement Cost Breakdown (2026)
Here’s how panel replacement pricing breaks down for the Lubbock market. These are typical estimated ranges – your written estimate sets the final price.
| Line item | Typical estimated range |
|---|---|
| Single standard panel replacement (one section) | $250 – $360 |
| Two or more panels replaced | $350 – $500 |
| Panel with decorative windows or inserts | $320 – $500 |
| Panel replacement plus realignment of hinges and rollers | $300 – $500 |
| Full new door installation (for comparison) | $700 – $2,200 |
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| General garage door repair | $150 – $600 |
What pushes a panel replacement toward the top of the range? Panel count is the biggest factor. Replacing one panel is a $250 – $360 job; replacing three or four turns it into a $350 – $500 job because the labor scales with the number of sections. Panel style matters too – a plain steel panel is at the bottom, a panel with windows or a carriage-style decorative insert is at the top. And if the door’s tracks, rollers, or springs are also worn, we may recommend addressing those at the same time so the new panel sits and travels correctly.
An important point about quotes: panel replacement isn’t the same job as repair. If a hinge is bent or a roller is seized, that’s a repair – general garage door repair in Lubbock runs $150 – $600, and roller replacement alone is $110 – $220. We diagnose the actual problem before quoting anything, so you’re not paying panel-replacement money for a repair that costs less.
What Affects Panel Replacement Pricing in Lubbock
Lubbock’s climate and housing stock both shape what panel replacement costs here. The city sits on the South Plains at roughly 3,200 feet, where wind is a daily fact of life and summer sun is intense. That combination is hard on garage doors, and it changes which panels fail and how often.
- Wind and hail exposure. Lubbock gets strong, sustained winds off the flat plains and hailstorms in spring and early summer. Dented and impact-damaged panels are common here. That’s why we see more single-panel replacements than full-door replacements – a hail hit usually damages one or two sections, not the whole door.
- Sun and heat cycling. West Texas summers push panel paint and steel through daily expansion and contraction. Dark-colored doors absorb more heat, which can cause panels to fade, warp, or delaminate earlier than the same door on a shaded elevation. If your door faces west or south, expect the finish to age faster.
- Panel style and material. A standard 24-gauge steel panel, a carriage-style panel with decorative overlays, a panel with windows, and a wood or composite panel all price differently. Clopay, Amarr, Wayne Dalton, and Raynor each make panels in several profiles, and matching your existing door is part of the cost.
- Color matching on older doors. If your door is more than a decade old, the original color may be discontinued. We work to find the closest current match, and in some cases the honest answer is to replace both the damaged panel and its neighbor so the color reads evenly from the street.
- Access and door size. A single-car door (usually 8 or 9 feet wide) takes less material and labor than a double-car door (16 feet). Tight driveway access, a low clearance above the door, or a door with a steeply pitched roof over the opening can add labor time.
- Whether other components are worn. A new panel on a door with tired springs, worn rollers, or misaligned tracks won’t travel smoothly. We look at the whole system – the mechanical door and the opener – and tell you what actually needs attention, not just what’s cheapest to sell.
How to Save on Panel Replacement
Panel replacement is one of the better-value garage door jobs you can do, and there are a few practical ways to keep the cost down without compromising the door.
- Replace only what’s damaged. If one panel took a hail hit and the rest of the door is solid, replacing that single section is almost always the right call. A new door is $700 – $2,200 – a single panel is a fraction of that.
- Group related repairs. If your rollers are also worn or a hinge is bent, handling panel replacement, roller replacement, and any realignment in one visit usually costs less than scheduling separate trips. Roller replacement alone runs $110 – $220; bundling it with panel work keeps the total down.
- Match the panel honestly. A close color match that you can live with costs less than chasing a discontinued factory color or replacing extra panels just to get a perfect blend. We’ll show you the options so you can decide.
- Watch the springs while you’re at it. If your door’s springs are near the end of their life, replacing a panel without addressing them means the new panel gets stressed by a door that isn’t balanced. Spring repair is $180 – $340 for one spring, and a matched pair is usually replaced together at about twice that. It’s worth knowing the condition before you commit.
- Get a free estimate first. We diagnose before we quote, and the estimate costs you nothing. Call (866) 361-7024 and we’ll give you a straight answer on whether you need a panel, a repair, or a new door.
If you’re weighing panel replacement against a full replacement, our Dunmore Garage Door Repair team walks through the whole door – springs, cables, tracks, rollers, and the opener – so you’re not guessing. And if you’re comparing what other work costs around the Lubbock area, we keep our pricing consistent across the site.
Repair or Replace: Which Makes Sense?
If a single panel is damaged and the rest of the door is structurally sound, replace the panel. If the door is sagging, the panels are rusted through in multiple places, or the whole door is out of balance, a new door is often the better long-term spend.
Here’s a simple way to think about it. Panel replacement is $250 – $500. A new door installation is $700 – $2,200. If you’re replacing one or two panels and the door has good springs, straight tracks, and sound rollers, you’re getting years more service for a fraction of the cost. If the door is rusted along the bottom edges of several panels, has cracked stiles, or the sections no longer line up, patching it panel by panel can add up to more than a new door.
We don’t push replacements. Our job is to tell you what’s actually wrong and let you decide. Whether you have a Clopay, Amarr, Wayne Dalton, or Raynor door, we know the system and we can match a panel to it or quote a full replacement if that’s the honest answer.
Can You Replace a Panel the Same Day?
In many cases, yes – single-panel replacements are often done the same day when the panel is a standard size and color we can source quickly. Specialty panels, discontinued colors, or windowed sections sometimes need to be ordered, which adds a few days.
When you call, we’ll ask you for the door’s make, approximate age, and a photo of the damaged section if you can send one. That lets us tell you up front whether it’s a same-day job or an order-in job. Call (866) 361-7024. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday.
FAQs – Panel Replacement Cost
How much does panel replacement cost in Lubbock?
Panel replacement in Lubbock typically costs $250 – $500, with most single-panel jobs landing around $280 – $380. Multiple panels or windowed sections push toward the top of the range. Call (866) 361-7024 for a free estimate – the written estimate sets the final price.
Is it cheaper to repair or replace a garage door panel?
Panel replacement is cheaper than a new door in almost every case. A single panel runs $250 – $360 compared to $700 – $2,200 for a full new door installation. If only one or two sections are damaged and the rest of the door is sound, replacing the panel is the right spend. Call (866) 361-7024 and we’ll tell you which makes sense for your door.
Can you replace just one panel on a garage door?
Yes – single-panel replacement is one of the most common jobs we do in Lubbock. A standard single panel replacement costs $250 – $360. The only catch is color matching: if your door is older, the original color may be discontinued, and we work to find the closest current match. Call (866) 361-7024 to talk through your door.
How much does garage door repair cost in Lubbock?
General garage door repair in Lubbock runs $150 – $600, depending on what’s wrong. Spring repair is $180 – $340 for one spring (a matched pair is usually replaced together at about twice that), cable repair is $130 – $250, and roller replacement is $110 – $220. Call (866) 361-7024 for an exact quote – estimates are free.
Does hail damage usually mean panel replacement?
Usually yes – Lubbock hail typically dents one or two panels rather than damaging the whole door, so panel replacement at $250 – $500 is the common fix. If the door also has bent tracks or worn rollers, we’ll address those at the same time. Call (866) 361-7024 and we’ll assess the damage.
Do you service my door brand?
We’re certified to service eight major brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That covers nearly every residential door and opener in Lubbock. Call (866) 361-7024 and have your door’s make and model ready if you can.
Ready to Get a Straight Answer on Your Door?
Panel replacement is a straightforward job when you know what’s actually wrong – and that’s where we start. Our technicians have up to 13 years of experience diagnosing panel damage, worn springs, misaligned tracks, and opener faults across every major brand. We diagnose before we quote, we work on your brand rather than pushing one, and we’ll tell you when a repair makes more sense than a new door.
Call (866) 361-7024 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. We’re closed Saturday.
Pricing reflects the Lubbock market as of 2026. Dunmore Garage Door Repair offers free estimates – call (866) 361-7024.
Written by the team at Dunmore Garage Door Repair.
What Our Customers Say
"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Amanda Ziegler"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Carlos Martinez"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Alma Delgado