Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Installation Cost in Lubbock?
New garage door installation in Lubbock typically runs $700 – $2,200, including removal of the old door. A standard single-car door with a basic steel panel usually lands at the lower end of that range, while a double-car door in a heavier material or a custom panel style pushes toward the top. The written estimate we provide after measuring your opening sets the final price, and that estimate is free.
What you pay depends less on the door than on four things: the size of the opening, the material and panel style, whether the old door and its hardware come out cleanly, and whether an opener needs replacing at the same time. We’ll walk you through all four before anyone touches a tool. Call (866) 361-7024. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Typical new door installation in Lubbock: $700 – $2,200, including haul-away of the old door.
- Opener installation is quoted separately at $250 – $550 when you add a new motor to a new door.
- Single-car openings cost less than double-car doors in the same material.
- Insulated panels and window inserts raise the price; basic steel panels keep it near the floor.
- Expect a free written estimate before any work begins.
Garage Door Installation Cost Breakdown (2026)
Here’s how the numbers break down for a typical residential job in Lubbock. These are estimated ranges for the Lubbock market this year, not exact quotes. Your written estimate will reflect the actual door, the actual opening, and the actual hardware.
| Line Item | Typical Estimated Range |
|---|---|
| New garage door installation (single or double, including removal of old door) | $700 – $2,200 |
| Opener installation (new motor and rails) | $250 – $550 |
| Panel replacement (when only one section fails) | $250 – $500 |
| Spring repair (one spring; a matched pair is about twice the range) | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| General garage door repair | $150 – $600 |
Those repair figures matter because installation isn’t always the right call. If your door is sound but a spring snapped, a cable frayed, or a roller seized, the repair line on that table is where you’ll land, not the installation line. When you add a new door, we look at the springs, cables, and rollers as part of the same job. Sometimes they’re already in good shape and sometimes they aren’t, and we tell you which before quoting.
What pushes installation toward $2,200? A heavy double door in a premium material, a custom panel style that has to be built and shipped, or a job where the opening, framing, or track has to be corrected before a new door can hang straight. What keeps it near $700? A standard single door in basic steel, a clean removal, and hardware that’s already straight and true.
What Affects Garage Door Installation Pricing in Lubbock
Lubbock isn’t a hard market to install a garage door in, but a few local realities show up on the estimate:
- Door size and number of bays. A single-car door is smaller and lighter than a double, and that difference shows up in both the door and the labor. A home with two separate single bays costs more than a home with one double because you’re buying two doors and two sets of hardware.
- Material and panel style. Basic steel sits at the bottom of the range; insulated steel, aluminum, and wood composite climb from there. Decorative windows and carriage-style panels add cost too.
- Opening condition. If the framing or the opening is out of square, the door won’t hang correctly, and correcting it adds labor. The high plains soil here can shift a wall over time, so we check the opening before quoting.
- Old door removal. Removal and haul-off are usually bundled into the install price, but a heavy old wood door or a door that’s rusted or bent takes extra hands and disposal.
- Openers and smart hardware. Adding an opener to a new door means a new motor, rails, a safety sensor pair, and possibly a smart-home connection. That’s the $250 – $550 line, and it’s separate from the door itself.
- Brand and parts availability. Some door and opener brands are more common in Lubbock than others, and the ones we work with most often are LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. When the door or opener you want is easy to source, the parts cost stays stable.
The wind here is worth mentioning. Lubbock’s open plain gets gusty, and a door that isn’t braced and balanced correctly will rattle and wear faster in a windy neighborhood. Getting the door and the hardware matched to the job is cheaper than replacing a door that got torn up because it was installed loose.
How to Save on Garage Door Installation
There’s no magic discount for a new garage door, but there are ways to keep a Lubbock installation from creeping up the range:
- Fix what’s fixable. If a single panel is dented but the door otherwise works, panel replacement at $250 – $500 can beat a full install. Repair first, replace when it’s actually needed, is the rule we work by.
- Stay with a standard size. Doors built to standard widths and heights cost less than custom sizes. A custom door is a custom part, and that shows up in the price.
- Choose a common material. Basic steel panels are the least expensive route. Insulation and windows are worth it for some homes and not others; we’ll tell you which side of that line you’re on.
- Bundle the opener with the door. Doing both at once means one visit, one set of measurements, and no separate scheduling. It doesn’t reduce the part cost, but it keeps the job from splitting into two.
- Ask for the written estimate. A free estimate means you know the total before you commit. Call (866) 361-7024 and we’ll schedule a time to measure the opening and walk you through the options.
One thing worth saying plainly: we don’t push a replacement when a repair will do, and we don’t push a repair when the door is at the end of its life. If the springs, cables, and track are sound but the panels are shot, we say so. If the panel is fine and the spring is tired, we say that instead.
Should You Repair or Replace a Garage Door in Lubbock?
Repair is usually the right call when the door’s structure is sound and one component has failed. Replace when the door is bent, severely rusted, off its track in a way that can’t be corrected, or when multiple panels are damaged. A spring, cable, or roller problem on an otherwise solid door costs far less than a new install at $700 – $2,200. If you’re not sure which side of the line you’re on, call (866) 361-7024. A look at the door tells us what needs to happen, and the estimate is free.
Do You Need a Permit to Install a Garage Door in Lubbock?
Most residential garage door replacements don’t require a permit, but that’s a question for the city’s building department, not for us. Permit rules depend on your specific address and the scope of the work, and it’s worth a quick call to confirm. If a permit is required for your job, knowing before installation starts keeps the project simple and on schedule.
What Brands of Garage Door and Opener Do You Install?
We work on your brand, not just ours. We’re certified to service and install eight major residential brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That covers most of what’s hanging in Lubbock garages, and it means you’re not locked into one manufacturer’s ecosystem when you need a new door or a new opener to go with it.
Because we handle the door and the opener as one system, there’s no finger-pointing between a door installer and an opener installer when something doesn’t line up. Whether your garage door is an older Craftsman or a newer LiftMaster, the same team diagnoses it, quotes it, and installs it. That’s also why we can be brand-agnostic on the recommendation: the door you buy shouldn’t be the door we stock, it should be the door that fits your opening and your budget.
How Long Does Garage Door Installation Take?
A typical single-door installation takes a few hours from the time we arrive, including removing the old door. A double door or a job with an opener added takes longer, and a job with opening corrections takes longer still. The written estimate will give you a realistic window so you’re not left guessing. Call (866) 361-7024 for scheduling. We answer 24/7 with fast dispatch from 7am to 7pm, Sunday through Friday; a call outside dispatch hours is booked into the next opening.
Can You Install a New Garage Door and Opener the Same Day?
Same-day installation is possible when the door and opener are on hand and the opening is in good shape. The order has to be placed and the parts sourced first, so the same-day conversation usually happens after the estimate. A same-day repair, by contrast, often happens the same day you call because the parts for a spring, cable, or opener fix are the ones we carry. Either way, the first step is a call: (866) 361-7024. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why We Handle the Whole System
A garage door is a door, a set of springs, a track, a set of cables, and an opener working as one machine. When one of those pieces is replaced without regard for the others, the door can look right and still perform badly: a heavy new door on tired springs, an opener sized for an old light door, a track that was never true. We look at all of it because a replacement should be an upgrade to the whole system, not a new panel on a tired frame. Call (866) 361-7024 for a free estimate.
FAQs – Garage Door Installation Cost
How much does garage door installation cost in Lubbock in 2026?
Garage door installation in Lubbock typically costs $700 – $2,200 this year. That estimated range covers the new door, removal of the old one, and standard installation. The written estimate sets the final price, and it’s free. Call (866) 361-7024 for an exact quote.
Does the price include removing the old door?
Yes, removal and haul-away of the old door are usually included in the installation estimate. If the old door is unusually heavy or damaged, the cost can shift toward the top of the $700 – $2,200 range. Call (866) 361-7024 to confirm your specific job.
How much does a new garage door opener cost?
New opener installation in Lubbock runs an estimated $250 – $550, separate from the door itself. That range covers the motor, rails, and sensor pair. Opener repair, if the motor is fine and a component isn’t, runs $120 – $320. Call (866) 361-7024 for a quote that fits your door and opener.
Is it cheaper to repair or replace my garage door?
Repair is usually cheaper when only one component has failed: a spring at $180 – $340, a cable at $130 – $250, or a roller at $110 – $220 costs far less than a new door at $700 – $2,200. Replace when multiple panels are damaged or the door’s structure is shot. Call (866) 361-7024 and we’ll tell you which side of that line your door is on.
Do you install garage doors from brands I already trust?
Yes. We install and service Clopay, Amarr, Wayne Dalton, and Raynor doors, and openers from LiftMaster, Chamberlain, Genie, and Craftsman. If your system is one of those, we know it. If it’s a different model, ask us. Call (866) 361-7024 to talk through your existing setup before choosing a replacement.
Can you come today to look at my door?
Yes, we can often schedule same-day service depending on the day and the job. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (866) 361-7024 and we’ll book you into the next available opening. Estimates are free, and same-day pricing is the same as any other day.
If you’re weighing a repair against a new door in Lubbock, the cheapest way to find out is to call us. We’ll measure the opening, look at the springs and hardware, and give you a written estimate before anything starts. Call (866) 361-7024. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. You can also start at Dunmore Garage Door Repair to see what services we cover in Lubbock.
Pricing reflects the Lubbock market as of 2026. Dunmore Garage Door Repair offers free estimates – call (866) 361-7024.
What Our Customers Say
"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Amanda Ziegler"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Carlos Martinez"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Alma Delgado